blister steel वाक्य
उदाहरण वाक्य
मोबाइल
- The blister steel and crucible steel were slow and extremely expensive.
- The raw material for this was blister steel, made by the cementation process.
- They were leading participants in the cartel in oregrounds iron, the raw material for blister steel.
- Carburised, causing little bubbles on the surface of the material, hence the name " blister steel ".
- Over generations, this knife has become intimately tied to blister steel was considered the hallmark of a master smith.
- The successful process was crucible steel, which was made by melting wrought iron and blister steel in a crucible.
- Blister steel ( made as above ) was melted in a crucible or in a furnace, and cast ( usually ) into ingots.
- In making crucible steel, the blister steel bars were broken into pieces and melted in small crucibles, each containing 20 kg or so.
- This would decrease its usefulness in making blister steel ( cementation ), where the speed and amount of carbon absorption is the overriding consideration.
- The museum demonstrates the process making blister steel from iron and steam installed as backup for times of drought, and a set of bellows.
- Whilst in Handsworth, he developed the process whereby it became possible to melt down raw or " blister steel " and produce cast ingots of steel.
- In 1740, Benjamin Huntsman began melting blister steel in a crucible to even out the carbon content, creating the first process for the mass production of tool steel.
- Because the ancients could not produce temperatures high enough to melt iron fully, the production of steel in decent quantities did not occur until the introduction of blister steel during the Middle Ages.
- At that period, if steel was needed, particularly pure varieties of iron were heated with charcoal in a cementation furnace to produce blister steel ( with about 1-2 % carbon ).
- Steel was produced in bloomery furnaces for thousands of years, but its extensive use began after more efficient production methods were devised in the 17th century, with the production of blister steel and then crucible steel.
- Blister steel was made from wrought iron by packing wrought iron in charcoal and heating for several days . See : Cementation process The blister steel could be heated and hammered with wrought iron to make shear steel, which was used for cutting edges like scissors, knives and axes.
- Blister steel was made from wrought iron by packing wrought iron in charcoal and heating for several days . See : Cementation process The blister steel could be heated and hammered with wrought iron to make shear steel, which was used for cutting edges like scissors, knives and axes.
- Bars were regularly examined and when the correct condition was reached the heat was withdrawn and the pots were left until cool usually around fourteen days . The iron had " gained " a little over 1 % in mass from the carbon in the charcoal, and had become heterogeneous bars of " blister steel ".
blister steel sentences in Hindi. What are the example sentences for blister steel? blister steel English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.